Clean your substrates using a UV Ozone Cleaner.
Place your substrate into the chuck and close the lid.
If you are using PEDOT:PSS, we recommend filtering before dispensing. A hydrophilic filter is best for this.
Fill your pipette with solution.
Input your spin cycle settings. We recommend a speed of 6000rpm and a total time of 30seconds for optimum results with PEDOT:PSS
Press the start button to begin the spin cycle.
Insert the end of the pipette into the hole directly above the substrate and quickly squeeze some of the solution onto it.
Wait until the spin coater has finished its cycle before removing your substrate and moving onto the next one.